基于布格重力异常研究运城盆地的构造特征          下载免费PDF全文

李洋洋  李勇江  姚家骏  谢汝一  贾宇鹏  李青 《地震工程学报》2020,42(4):919-926

利用运城及周边地区的布格重力资料,对布格重力数据进行小波分解得到不同阶次的重力异常信息。依据各个阶次的小波变换结果并结合该区域的地质构造环境,对小波变换细节图中存在的特征较为明显的布格重力异常带进行深入分析,对异常所揭示的构造现象在地壳不同深度的分布特性等进行分析研究。结果表明:小波变换细节与区内地壳内部的隆起、凹陷及断裂构造具有很好的对应关系,可以对运城盆地的构造特征及地壳结构做更加深入的研究。  相似文献   

Moving from plot-based to hillslope-scale assessments of savanna vegetation structure with long-range terrestrial laser scanning (LR-TLS)     

《International Journal of Applied Earth Observation and Geoinformation》2020

Reliable quantification of savanna vegetation structure is critical for accurate carbon accounting and biodiversity assessment under changing climate and land-use conditions. Inventories of fine-scale vegetation structural attributes are typically conducted from field-based plots or transects, while large-area monitoring relies on a combination of airborne and satellite remote sensing. Both of these approaches have their strengths and limitations, but terrestrial laser scanning (TLS) has emerged as the benchmark for vegetation structural parameterization – recording and quantifying 3D structural detail that is not possible from manual field-based or airborne/spaceborne methods. However, traditional TLS approaches suffer from similar spatial constraints as field-based inventories. Given their small areal coverage, standard TLS plots may fail to capture the heterogeneity of landscapes in which they are embedded. Here we test the potential of long-range (>2000 m) terrestrial laser scanning (LR-TLS) to provide rapid and robust assessment of savanna vegetation 3D structure at hillslope scales. We used LR-TLS to sample entire savanna hillslopes from topographic vantage points and collected coincident plot-scale (1 ha) TLS scans at increasing distances from the LR-TLS station. We merged multiple TLS scans at the plot scale to provide the reference structure, and evaluated how 3D metrics derived from LR-TLS deviated from this baseline with increasing distance. Our results show that despite diluted point density and increased beam divergence with distance, LR-TLS can reliably characterize tree height (RMSE = 0.25–1.45 m) and canopy cover (RMSE = 5.67–15.91%) at distances of up to 500 m in open savanna woodlands. When aggregated to the same sampling grain as leading spaceborne vegetation products (10–30 m), our findings show potential for LR-TLS to play a key role in constraining satellite-based structural estimates in savannas over larger areas than traditional TLS sampling can provide.  相似文献   

沿107.6°E南北向剖面鄂尔多斯地块及周缘地区地壳结构          下载免费PDF全文

陈洁  陈永顺  郭震  杨挺 《地球物理学报》2020,63(7):2592-2604

鄂尔多斯地块紧邻青藏高原东北缘,位于华北克拉通的西部,在我国中生代、新生代以来东部地区的构造活动中起到了重要作用.对鄂尔多斯及其周缘地区的研究可以提供有关华北克拉通的形成、演化和破坏过程的重要信息.本文选取了纵贯鄂尔多斯的107.6°E附近南北剖面上的44个流动地震台站进行分析,采用接收函数方法,进行Kirchhoff偏移成像,并且结合在该区域内前人的地震面波频散进行联合反演,获得剖面下方的地壳内部精细结构.研究结果显示:(1)莫霍面在鄂尔多斯北部较平缓,约45km深;在鄂尔多斯南部有所加深,达到50km;其北边的河套盆地的地壳厚度约为50km;南边的渭河盆地到秦岭地区及四川盆地的地壳厚度从约为40km增厚到47～50km.(2)河套盆地下方存在大规模的低速异常,最深可达25km,反映了其显著的拉张构造和沉积历史.(3)秦岭造山带下方的低速异常对应于其主要为长英质的地壳组分,可能是由于中生代的拆沉作用导致的地壳下部基性岩石层的缺失.(4)以38°N为界的鄂尔多斯地块,南北部地壳速度结构存在差异,可能表明了这两部分经历的构造历史不同.  相似文献   

Improving integrity of RC beam-column joints with deficient beam rebar anchorage     

Syafri Wardi  Yasushi Sanada  Nandita Saha  Susumu Takahashi 《地震工程与结构动力学》2020,49(3):234-260

In recent earthquakes in developing countries, severe damage was observed on reinforced concrete buildings. This study focuses on exterior beam-column joints with substandard beam rebar anchorage and seismic strengthening by installing wing walls. First, a series of experiments was conducted to investigate the seismic behavior of exterior joints with substandard beam rebar anchorage representing typical Bangladeshi buildings. Two 0.7-scaled exterior joint specimens were tested, and these specimens showed beam rebar anchorage failure and/or joint shear failure. Prior to strengthening of the joint, a series of pullout tests was conducted on postinstalled bonded anchors in low-strength concrete for strengthening design. Then, an experiment was performed to apply the strengthening method by wing walls to one of the exterior joint specimens to improve the integrity, and this method was intended to prevent the failure of beam rebar anchorage. The strengthening method is proposed to extend the development length of beam longitudinal bars by considering the embedment length along the wing walls. The test results verified the effectiveness and applicability of the proposed strengthening method to upgrade exterior RC beam-column joints with deficient beam rebar anchorage.  相似文献   

城市场景结构感知的网格模型简化算法     

张春森  张会  郭丙轩  彭哲 《测绘学报》2020,49(3):334-342

针对二次误差测度(QEM)网格简化算法全局几何特征信息损失严重的缺点,提出一种具有结构感知功能面向城市三维模型重建的网格简化算法。该算法顾及城市影像中平面结构特征,以代理平面为全局特征约束条件,使模型在简化过程中全局结构特征更多地被保持,以利于多层次细节模型(LOD技术)、网格优化提速等模型后续操作。以倾斜摄影获取影像生成的初始三角网格模型为试验数据,采用所给算法对其进行网格简化并与QEM算法进行对比。结果表明:所给算法简化精度及简化效率均优于QEM算法。  相似文献   

Talus slope geomorphology investigated at multiple time scales from high-resolution topographic surveys and historical aerial photographs (Sanetsch Pass,Switzerland)     

Hanne Hendrickx  Lars De Sloover  Cornelis Stal  Reynald Delaloye  Jan Nyssen  Amaury Frankl 《地球表面变化过程与地形》2020,45(14):3653-3669

Talus slopes are common places for debris storage in high-mountain environments and form an important step in the alpine sediment cascade. To understand slope instabilities and sediment transfers, detailed investigations of talus slope geomorphology are needed. Therefore, this study presents a detailed analysis of a talus slope on Col du Sanetsch (Swiss Alps), which is investigated at multiple time scales using high-resolution topographic (HRT) surveys and historical aerial photographs. HRT surveys were collected during three consecutive summers (2017–2019), using uncrewed aerial vehicle (UAV) and terrestrial laser scanning (TLS) measurements. To date, very few studies exist that use HRT methods on talus slopes, especially to the extent of our study area (2 km²). Data acquisition from ground control and in situ field observations is challenging on a talus slope due to the steep terrain (30–37°) and high surface roughness. This results in a poor spatial distribution of ground control points (GCPs), causing unwanted deformation of up to 2 m in the gathered UAV-derived HRT data. The co-alignment of UAV imagery from different survey dates improved this deformation significantly, as validated by the TLS data. Sediment transfer is dominated by small-scale but widespread snow push processes. Pre-existing debris flow channels are prone to erosion and redeposition of material within the channel. A debris flow event of high magnitude occurred in the summer of 2019, as a result of several convective thunderstorms. While low-magnitude (<5,000 m³) debris flow events are frequent throughout the historical record with a return period of 10–20 years, this 2019 event exceeded all historical debris flow events since 1946 in both extent and volume. Future climate predictions show an increase of such intense precipitation events in the region, potentially altering the frequency of debris flows in the study area and changing the dominant geomorphic process which are active on such talus slopes. © 2020 John Wiley & Sons, Ltd.  相似文献   

Using visibility analysis to improve point density and processing time of SfM-MVS techniques for 3D reconstruction of landforms     

Álvaro Gómez-Gutiérrez  Trent Biggs  Napoleon Gudino-Elizondo  Paz Errea  Esteban Alonso-González  Estela Nadal Romero  José Juan de Sanjosé Blasco 《地球表面变化过程与地形》2020,45(11):2524-2539

Image network geometry, including the number and orientation of images, impacts the error, coverage, and processing time of 3D terrain mapping performed using structure-from-motion and multiview-stereo (SfM-MVS). Few studies have quantified trade-offs in error and processing time or ways to optimize image acquisition in diverse topographic conditions. Here, we determine suitable camera locations for image acquisition by minimizing the occlusion produced by topography. Viewshed analysis is used to select the suitable images, which requires a preliminary digital elevation model (DEM), potential camera locations, and sensor parameters. One aerial and two ground-based image collections were used to analyse differences between SfM-MVS models produced using: (1) all available images (ALL); (2) images selected using conventional methods (CON); and (3) images selected using the viewshed analysis (VIEW). The resulting models were compared with benchmark point clouds acquired by a terrestrial laser scanner (TLS) and TLS-derived DEMs. The VIEW datasets produced denser point clouds (28–32% more points) and DEMs with up to 66% reduction in error compared with CON datasets due to reduction of gaps in the DEM. VIEW datasets reduced processing time by 37–76% compared with ALL, with no reduction in coverage or increase in error. DEMs produced with ALL and VIEW datasets had similar slope and roughness, while slight differences that may be locally important were observed for the CON dataset. The new method helps optimize SfM-MVS image collection strategies that significantly reduce the number of images required with minimal loss in coverage or accuracy over complex surfaces. © 2020 John Wiley & Sons, Ltd.  相似文献   

小尺度网格层析速度建模方法在低幅构造区时深转换中的应用     

吕振宇  魏鹏 《地球物理学进展》2020,(1):339-344

渤海M油田区浅层多发育低幅构造,低幅构造区的地震数据对常规层析成像不够敏感,导致常规速度反演方法很难保证低幅构造速度建模的准确性,从而给时深转换工作带来较大误差.本文提出一种小尺度网格层析速度建模方法,该方法基于低幅构造的薄层信息,在有薄层信息的地层加密网格分布,从而实现根据地质条件划分网格的策略,进而通过解析矩阵方程实现速度模型的迭代更新.通过实际数据应用证明,对于渤海M油田利用本文提出的高精度网格层析速度建模方法是有效可行的,该方法能够有效提高低幅构造区速度建模的精度,利用该方法得到的速度模型能够大幅提高时深转换的精度,从而指导构造解释及成图工作.  相似文献   

渤海湾盆地歧口凹陷地层压力结构特征     

姜文亚  宋泽章  周立宏  蒲秀刚  王娜  代昆  万伟超  刘祥柏 《吉林大学学报(地球科学版)》2020,50(1):52-69

深化含油气沉积盆地的压力结构研究，厘清异常压力的空间展布，对划分含油气系统、评价有利输导体系与明确勘探甜点区带具有重要的理论和实践意义。为深化渤海湾盆地富油凹陷的油气二次勘探，本文以歧口凹陷为研究对象，对其压力结构进行重点刻画。在实测地层压力的校正下，综合单井、连井和二维地震地层压力结构分析，厘清了歧口凹陷的压力结构特征，识别出4类纵向压力结构：①单超压带结构；②双超压带结构；③多超压带结构；④静水压力结构。纵向上，歧口地区存在3类纵向压力系统样式——单超压系统、双超压系统、静水常压系统。双超压系统是歧口凹陷的主要压力系统样式，广泛发育于主凹和各大次凹；从凹陷中心向盆地边缘，双超压系统逐渐向单超压系统、静水常压系统过渡。单超压系统主要分布于盆地边缘的斜坡和潜山区，如歧北高斜坡、羊三木-扣村潜山等。静水常压系统则主要分布在离深凹区更远的沈青庄潜山和埕北斜坡区域。上部超压系统和下部超压系统的顶板分别位于东营组和沙三段内部，侧向上受盆地边缘和深大断裂控制。上部超压系统的形成主要受欠压实作用控制，以歧口主凹为中心呈环带分布；而下部超压系统的形成主要受生烃作用控制，以主凹和几大次凹为中心分布。未来，下部超压系统中保存的天然气将成为歧口地区超深层天然气勘探的重点对象。  相似文献   

基于修正SWAT模型的岩溶地区非点源污染模拟初探——以横港河流域为例   总被引：3，自引：0，他引：3  

赖格英  易姝琨  刘维  盛盈盈  彭小娟  熊家庆  潘思怡  吴青 《湖泊科学》2018,30(6):1560-1575

岩溶流域含水系统的主要特征之一是连通地表的落水洞等垂直管道将近水平的地下暗河联系起来，降水及其形成的地表径流可以通过这些管道迅速地灌入地下河系，从而改变了水及其所携带的非点源污染物质在垂直与水平方向的传输速度与数量，使岩溶流域内地表-地下之间的物质交换与传输过程变得比较复杂；应用广泛的SWAT模型在模拟岩溶地区的水文、水质时会存在一些不足与局限.为此，本文针对岩溶水系统特征，引入落水洞、伏流、暗河的水文过程以及主要营养盐的输移过程，修正SWAT模型原有的水文循环过程及相关算法，改变其只适用于松散均匀介质流域非点源污染模拟的单一特征，并研究建立适合于岩溶流域的非点源污染模型和相应的模拟方法.选取横港河流域岩溶地区作为非点源污染的对象，应用修正后的模型通过控制性的模拟方法和敏感性性分析，定量评估落水洞、伏流、暗河等岩溶特征对氮、磷等主要非点源污染物质输移的影响及其带来的时空效应，并进一步探讨落水洞、伏流、暗河等对地表-地下水文与营养盐的交互作用及转换机理.结果表明，岩溶特征对流域的氮、磷负荷有增加作用，其中总磷的增加明显大于总氮的增加，总磷和总氮的增量分别为0.86%和2.12%；植被岩溶指数的增加会导致流域可溶性磷、有机磷的产出量增加，有机氮、地表产流中硝酸氮和沉积磷的产出量则居其次，落水洞改变了降雨的产流方式，增加了落水洞所在流域的有机磷和有机氮的产出，其增量变化在0~0.7和0~0.3 kg/hm²之间.  相似文献